AG Salons & Nouvelles de la mécanisation

The new cab on the Schäffer 3650-2 wheel loader provides 30% more interior space than the structure on the previous 3650.The combination of 10% more glazing, a more compact bonnet and larger exterior mirrors improve all-round visibility. Noise levels are lower, thanks to improved insulation and greater suspension travel...

The vertical folding boom and close-coupling of the latest Tramspread umbilical dribble bar makes it suitable for use with any 150hp+ tractor, just like the horizontal folding version.The ability to fold down to 18m, with shut-off taps, has been retained from the existing 18/24m model. Pipework from the front-mounted swi...

The water flow supplied by the Stihl WSA 40 battery-powered container helps suppress dust and cool the cutting wheel of a cut-off machine.Operating at a consistent pressure of 1.5 to 2.5 bars, with one 10.8v AS2 lithium-ion battery the compact 10-litre capacity pressurised container can deliver water continuously for up ...

Vredo, the Dutch manufacturer of self-propelled slurry machines, injectors and grassland equipment, has been acquired by investment company Apicem.Supported by Apicem’s capital investment and strategic guidance, the new Vredo management team, which includes members of the third generation of the De Vree family, will fo...

Valtra showed this eye-catching hand painted G Series tractor at Agritechnica and announced that the 100-145hp range can now be ordered with a CVT.Developed and manufactured by Agco, the new transmission option is available across all four models and comes in two configurations – Active and SmartTouch. P...

Alliance has sold over one million of its Agri Star II series tyres worldwide since the launch in 2020. Looking to keep the momentum going in its 70th anniversary year, YOHT’s flagship brand has added a row crop version to the range.Designed to provide reliable performance for row crop equipment, such as a sprayer, bot...

The MLT625e (2.5t to 5.9m) at Agritechnica is Manitou’s first electric telehandler for the agricultural sector.The 35kWh lithium-ion battery powers two electric motors – a 40kW one for the driveline, and a 30kW unit for the hydraulics. Sufficient for five hours of typical work (65% handling, 15% loadin...

The H7-600E diesel-electric rotary combine was a big hit on the Agritechnica stand of Chinese manufacturer Zoomlion.The hybrid technique sees a 480hp six-cylinder Chinese Stage V block mated to a generator that powers a dozen electric motors. The most visible is the one driving the 9.2m header, but inside and underneath ...

Tallis Amos Group (TAG) has taken on the Bailey Trailer franchise in Shropshire.Available exclusively from the dealer’s Allscott depot, and in turn across all six of its depots, TAG sales director Tom Shakeshaft says Bailey trailers are renowned for their build quality and reliability, and a perfect fit for the company...

Alamo will be introducing the Mantis self-propelled hedge cutter in Europe next year. Made in Texas, it has not been confirmed which Alamo business (it owns Bomford, McConnel, Spearhead and Twose to name but a few) will handle sales in our market.The machine on show is the second generation of Mantis self-propelled which...

A trio of mounted forager harvesters on the Özbudak stand at Agritechnica piqued our interest. One of a number of manufacturers from Turkey at the show, Özbudak Makina is from the west of the country and in a predominantly livestock area.The firm is looking at developing a trailed machine following several enquiries at...

Making over 650 buildings per year, Hörmann was displaying this typical wooden truss example with solar panels fitted directly to the purlins.Stefan Hörmann points out that fitting the panels directly costs approximately five to 10% more than mounting the PV panels onto a cladded roof. But even, owners were starting to...

Opico has added Simtech direct drills to the portfolio. The line-up includes grassland and arable options ranging from mechanical box-drills to wider pneumatic units.The smaller, simpler gravity-fed box drills start with the 1.8m VT180 model aimed at the viticultural market and also include the TSG240 and TSG300 grass dr...

Alongside a new precision planter, Bednar was showing its entry to the power harrow drill market with 3.0m and 6.0m versions.Our focus here is on the 3.0m wide Soniq ON3000. Rated up to 250hp, the power harrow is sourced from an Italian manufacturer that uses double bearings and a top cap for easier access the a full top...

Falc was displaying a new triple flail mower setup with the front unit having a pull type headstock. This is said to allow better ground following.It uses the Italian makers usual 2.8m wide flail mower, but the rear pins, closest to the tractor, run in vertical slots which gives the required float. The slides on either s...

Lemken surprised Agritechnica show goers with its first proper direct drill, the Solitair NT which has been tested in the UK this year.Niklas Krueger is one of those tasked with bringing the new drill to the market. The NT project has been on the go for over three years and is a Lemken machine that uses some of the Equal...

Alongside the new front mower, Sip was unveiling a light-weight triple, the Alpine Disc 800D. Garry Daly from Irish importer Farmec says that there its customers have been asking about a lower cost rear butterfly to help increase output but at a more modest price point.The 7.95m wide model uses a pair of belt driven, sev...

The Puro is the first dedicated precision planter to appear in Pöttinger livery and while it uses MaterMacc know-how, it is not just a rebadged machine.This is a six-row machine with telescopic frame and row spacing of 70-75cm. Fertiliser hopper capacity is 1,300-litres and it uses air for the delivery to the coulter, s...

Battery powered handler maker Mona was back at Agritechnica with an expanded line up. Sitting alongside its refreshed yard loaders was a new prototype rigid chassis telehandler and standalone battery packs.The Nova has a 53kWh lithium ion battery pack in the 2,700kg, 6.36m handler. The battery should provide enough power...

Caernarfon-based Menai Tractors has taken on the Vicon franchise across North Wales and Anglesey.The appointment gives the business access to grass machinery that compliments its New Holland tractor franchise. With 14 staff and six technicians on the road, Menai Tractors will handle sales, service and support for new and...

The Mark II versions of the McHale V6 and V8 variable chamber balers made their Agritechnica debut. The big change is that the mid-spec V6750 and V8950 get ISObus control as standard. Not only that, but the mid-range offering now has active bale density which has been on the top spec V6760 and V8960 balers. The oil tank ...

The HDX350 is a new plain mower from Samasz. Timmy O’Brien from Egmont Agri says this is a mower they have been waiting for as it is lighter than the XT.Both are centre pivot mounted mowers that fold over-centre for transport, they even use the same 3.5m, eight disc cutterbar. The big difference is in the headstock, wi...

Sky Agriculture has developed a new app to work alongside its equally new trailed spreader that offers a quick change from fertiliser to lime.The Fertieye app uses the phone’s camera to scan a sample of the fertiliser, ignoring any doubles, and in 30 seconds sends the results to the spreader control box. The software i...

Bobcat is looking to grab some headlines with special edition versions of its V-Drive telehandler. Only 25 of each black edition 3870HF (3.80t, 7.00m) and 4380 HF (4.30t, 8.00m) will be made, each one having a numbered plaque in the cab to identify it.As well as the black livery, the handlers will be kitted out to a high...

Made in Ireland, tested in England and launched in Germany. AgriSpread was showing its new AS3000 bulk spreader at Agritechnica. This uses much of the technology and features of the AS2000 but gains a conveyor system to widen the spreading width up to 30m with lime and up to 48m with urea.The conveyor system places the d...